First-timer's Guide to Installing a New Shower Unit

First-timer's Guide to Installing a New Shower Unit

Blog Article

Click Here

Every person has their own individual views with regards to How to Install a Direct-to-Stud Shower Enclosure.

An effective shower installation requires careful preparation and a great deal of work. For the most part, you will certainly require to do three types of jobs: framing wall surfaces, installing the plumbing, as well as finishing walls.

Prep work

Firstly, you have to decide on the kind of shower that you want to install. It is essential to ascertain whether the chosen shower is capable of handling specific systems and can control a risk-free level of water with the central heating boiler. A lot of shower systems nowadays are made to be versatile to different water pressures (such as kept warm water as well as cold mains).
It is also essential to take into account the water pressure and the planning of the piping and drain for the shower

Various Kinds Of Shower Units

Push-on Mixer: The hose and also spray parts of the push-on mixer shower system can be attached to the bath faucet as per your need, and also the water temperature level can be changed by means of the taps. Push-on mixers are cheap as well as incredibly easy to set up. Nonetheless, although the tube connection is simple, it is easily removed. Furthermore, it is bothersome to change the temperature level.

Bath/Shower Mixer: The hose pipe and spray of this type of shower are incorporated with a bathroom mixer tap, and also the temperature can be readjusted with the bathroom faucets. It is an extremely affordable option and also no additional plumbing is entailed. Nevertheless, the bath/shower mixers additionally struggle with inconvenient temperature control alternatives.

Handbook Mixer: The pipe and also spray of a hands-on mixer shower system belong of the wall surface unit and the hot and cold water products are linked to a single shutoff The temperature level as well as pressure of the water are managed through either one or a range of knobs (in more pricey showers). Although temperature control is much easier in manual mixer types, they are extra expensive than the previously stated mixers. They likewise need additional plumbing of hot and cold water pipes.

Thermostatic Mixer: The hose and spray of this shower type are a part of the wall system and also the cold and hot water products are attached to a single valve below as well. It is total with an integrated stabiliser to self-adjust the water temperature level and to prevent it from becoming too hot. Among the most significant advantages of a thermostatic mixer shower kind includes practical temperature level control. Nonetheless, it is one of the most costly of the various mixer options.

Power Shower: A power shower is a single system consisting of an effective electrical pump that can altering both the water stress and temperature. This type of shower can be fitted if there is supply of water from a cold water tank and also a hot water cylinder. A power shower makes the modification of both pressure as well as temperature level very easy. On the other hand, it disagrees for water warmed straight by the shower or where the water is provided by a mix boiler under mains pressure.

Electric Shower: An electrical shower is plumbed right into a mains cold water supply and it heats up the water electrically. It is important to note that for this shower kind to be set up, the keys pressure requires to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system allows the temperature and stress to be changed using a knob. Versions with temperature level stabilisers are better as they remain untouched by various other taps elsewhere being used within the home. A major drawback of electric showers is that the control knob just permits the option of heats at much less pressure, or lower temperature levels at a higher stress. This is problematic in the winter season when the spray is usually weak and the keys water is chillier. However, this issue is tackled in some models which are offered with a winter/summer setting.

Method

Depending upon the sort of shower you desire to mount, the shower head must either be fitted in order to prevent its contact with the water in the bathroom listed below or the base tray, or it has to have a check shutoff.
Before starting, it is advisable to note the positions of the shower head as well as control, and to plan the pipe-work included. Furthermore, the drainage system to eliminate the drainage will certainly need to be intended. Both settings of the wire course and the shower switch will also need to be considered if an instant or electric shower device is being set up.
Use the instruction overview supplied with the shower unit to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is necessary to cut off the water system. In order to shield the pipes, they should be provided a waterproof covering as well as additionally fitted with isolating valves. The pipelines can then be buried into the wall as well as smudged over to neaten the total appearance.
Fit the base tray, shower head, and also installations.
Connect the main shower control to the pipelines that will certainly be supplying the water (This might require a female screw string adapter).
Reconnect the water supply and test the pipelines for any leaks, as some might require tightening.
If you are setting up an electric shower, keep in mind to switch off the electrical power supply before making any kind of electrical connections. Once these links have been made (there need to be support within the instruction manual), the power supply can be switched over back on.

Adjusting Water Pressure to Fit Your Shower

The cold water reservoir can be raised to a better elevation (in some cases as little as 150mm (6inches)) by fitting a solid wood support under it - possibly made up of struts and blockboards. If you choose this alternative, the primary and also distribution pipelines will certainly additionally have to be elevated to fulfill the new elevation of the storage tank.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it has to be linked into the power supply in order to run.

Piping as well as Water drainage

It is best to make use of 15mm diameter supply pipes, and also make the runs to the shower as short as well as straight as feasible so regarding maintain optimal pressure as well as minimise heat loss. Furthermore, by reducing the use of elbows for pipe corners, you can decrease the resistance in the flow of the supply of water. You can attain this by bending the pipes instead.

Most Common Blunders

Violating or disregarding local code constraints.

Using pipes that are too tiny.

Affixing copper to galvanized without making use of a brass or dielectric suitable in between the two.

Not using tape or pipeline substance at threaded joints.

Not leveling your fixtures when mounting them.

Not installing an air gap filling up for fixtures.

Reducing supply stub outs also brief to install the shutoff valves onto after the finished wall is in location.

Not properly lining up tubing right into fittings or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will certainly create a leak.).

When turning the water back on in your house, constantly run the outdoors hose pipe valve or flush your commodes to hemorrhage dirt and also air from the lines. This particles can cause problems in your sink faucets and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As an enthusiastic reader on How to Install a Direct-to-Stud Shower Enclosure, I assumed sharing that excerpt was smart. Please take the opportunity to promote this content if you liked it. We appreciate reading our article about How to Install a Shower Enclosure .

Book

Report this page